AZDENT Dental Ceramic Glass Block Lithium Disilicate Press Units HT/LT for Veneer Anterior Crown Inlaid Lab CAD/CAM Restoration Material 10pcs/Box. Natural coloration with excellent aesthetic effects. Suitable for ultra-thin veneers, with enhanced acid resistance and stain resistance. Minimal reaction layer, facilitating easier handling. Reliable strength with no risk of chipping. Indications: Placing/Inlays/Inlays/Anterior/Crown/Posterior Crown. FDA approved.
- Dental Glass Ceramics (Ingot) is a worldwide popular dental all-ceramic material with highly bionic aesthetic effect. With its exquisite design experience, good strength and higher casting accuracy, it can effectively promote the pleasant cooperation between the technician end and the clinical end, and provide a comfortable diagnosis and treatment experience for both doctors and patients.
|
- Natural coloration with excellent aesthetic effects.
- Suitable for ultra-thin veneers, with enhanced acid resistance and stain resistance
- Minimal reaction layer, facilitating easier handling.
- Reliable strength with no risk of chipping.
-
Material: Lithium Disilicate/Ceramic glass
-
Porcelain block type:
(Depending on the different permeability of the porcelain block can be divided into 2 categories)
1. HT (very transparent)
2. LT (Low transparency)
|
- Plating
- Inlay
- Anterior crown
- Onlay
- Posterior crown
- Complete crown bridge
|
- SiO₂: 61% ~ 71%
- Li₂O: 11% ~ 17%
- ZrO₂: 1% ~ 5%
- Other oxides: 6% ~ 30%
|
- Biaxial Bending Strength:460Mpa
- Density :2.4-2.6g/cm³
- Vickers Hardness:5400+400MPa
- Fracture Toughness:2.55MPa.m1/2
- Coefficient of Thermal Expansion：9.8±0.5 10-6K-1
- Die Casting Temperature:905-920℃
- Chemical Solubility:30.2ug·cm-2
- Radioactivity：<0.019Bq/g
|
- Cytotoxicity Test: Cytotoxicity Grade 0
- Acute Systemic Toxicity Test (Oral Route): No Systemic Toxicity
- Sensitization Test: Non-sensitizing
- Hemolysis Test: Hemolysis Rate < 5%
- Ames Test: Mutagenicity Negative
- Oral Mucosa Irritation Test: No Oral Mucosa Irritation
- Subchronic Systemic Toxicity Test: No Subchronic Systemic Toxic Response
|
- Transparence: HT/LT
- Size: D13 * 10
- Investment ring: 100g
- Start temperature: 700 ℃
- Heating rate: 60 ℃/min
- Max.Temp.:905 ℃
- Maintenance time: 15min
- Gide-sur: 700 ℃
- Vide-Off:905 ℃
|
|
There may be a certain difference between the displayed temperature of each press oven and the actual temperature inside the oven due to model and maintenance in differences. When you use AZDENT press ingots, please check if the press molding procedure is suitable for your press oven; If the edge of the restoration is incomplete or if the ring is cracked during the press flow process, please increase the maximum temperature by 3 ℃ and start again; If there are traces of tiny air bubbles on the catering surface, please lower the maximum temperature of 3 ℃ and start again; Discover the optimal press flow temperature suitable for your press oven by the above means. You can also contact AZDENT's after-sales engineers directly for troubleshooting
|
