Dental Electric Wireless Torque Driver Universal Implant Torque Wrench Handpiece 16pcs Drivers 10-50Ncm 360° Rotating. Professional Cordless Implant Wrench. A safe, high-efficiency solution for dental surgery. 360° Precision Ratchet Head, Defined Tactile Stops at Every Angle. Equipped with a smart calibration system—alerts with a buzzer and stops automatically upon reaching preset torque. Seamlessly toggle directions with a single press, ensuring effortless control and smoother clinical workflows. Applications: Implant Installation & Removal, Abutment Placement, Healing Nut Adjustment.
- Comprehensive Implant & Repair Solutions — Perfect for first-phase implants, second-phase restorations, and versatile backup clinical tasks.
- Precision Torque & Auto-Stop Control — Equipped with a smart calibration system—alerts with a buzzer and stops automatically upon reaching preset torque.
- One-Touch Forward/Reverse Switch — Seamlessly toggle directions with a single press, ensuring effortless control and smoother clinical workflows.
- Applications: Implant Installation & Removal, Abutment Placement, Healing Nut Adjustment.
- Sterilizable contra angle (Electronic handle can not be autoclaved)
|
- Main Unit Care:
- If the tool will not be used for an extended period, recharge the battery every 15 days.
- Unplug the wrench motor main unit within 2 hours after it is fully charged. Failure to do so may damage the battery.
- After use, wipe the main-body housing with a soft cloth dampened with alcohol. Store it in a dry, well-ventilated area once the surface is completely dry.
*Important Note: Do NOT use highly concentrated ethanol or corrosive liquids to clean the main unit.
- Maintenance of the bender:
- Apply oil to the shaft center through the screw-start insertion port daily to extend shaft service life.
- Spray lubricant at the end of every workday for at least 1-2 seconds per application.
- For heavy-duty-workloads: Spray lubricant once at noon and again at the end of each workday.
- Spray lubricant before autoclaving.
|
| Model: |
Electric Torque Driver XLY-DNBS300 |
| Input: |
100-240V/AC 50/60Hz |
| Output: |
DC 5V/1A |
| Battery model: |
INR 14500 3.7V 800mAh |
| Standard Head: |
20:1 |
| Rotation Speed: |
10–50 r/min |
| Torque: |
5–50 N·cm |
| Net Weight: |
155g |
| Main Unit: |
1 PC |
| 20:1 Contra-angle Handpiece Head: |
1 PC |
| Power Adapter: |
1 PC |
| Screwdrivers: |
16 PCS |
| Certificate of Compliance: |
1 PC |
| Instruction manual: |
1 PC |
