Dental Zinc Oxide Eugenol Cement Kit Self-Curing Type III 20g Powder + 6ml Liquid. Dental Zinc Oxide Eugenol Cement Kit Self-Curing for Temporary Crowns, Bridges, Fillings & Repairs, High Strength, Super Adhesive Formula, 20g Powder + 6ml Liquid.
- A historically trusted, self-curing zinc oxide eugenol cement designed for the temporary cementation of crowns and bridges, as well as restorations in Class III, IV, limited Class I, and deciduous Class II cavities.
- Indications: Primarily for temporary dental restorations of Class III, IV, and limited Class I cavities.
Suitable for fillings in deciduous teeth of Class II.
|
-
Proven Safety: Trusted by dentists for close to a century. Gentle formula safe for sensitive patients and children.
-
Dual-Action Care: Seals cavities quickly while soothing pulp irritation with natural eugenol.
-
Thermal Protection: Blocks temperature sensitivity by matching natural dentin conductivity.
-
Easy to Use: No tools needed. Self-curing formula for temporary crowns and fillings.
|
- Mixing time: 1.5 minutes.
- Solidifying time: 3–10 minutes.
- Resistance (24 hours after mixing): ≥25 MPa.
- Corrosion in water: ≤1.5%.
- Arsenic content: ≤2 mg/kg
|
- Procedure:
- Use a clean, dry glass mixing slab at room temperature (22–24°C) and humidity of 50±10%.
- Ensure the spatula is non-corrosive, free from dust, set cement, and moisture.
-
Powder and Liquid Ratio:
- For cement: 1.5 g powder : 0.5 ml liquid.
- For base: 1.8 g powder : 0.5 ml liquid.
-
Mixing Technique:
- Divide the measured powder into three portions: 1/4, 2/4, and 1/4.
- Incorporate 1/4 of the powder into the liquid and mix.
- Add 2/4 of the powder and mix further.
- Finally, add the remaining 1/4 of the powder.
- Total mixing time should not exceed 90 seconds.
|
- Product name: Dental Zinc Oxide Eugenol Cement
- Type: Type III
- Curing Method: Self-curing
- Spec: Powder 10g*2 bottles+Liquid 6ml* 1 bottle
- Packing size: 9*5*3.3cm
- Packing weight: 50g
- Shelf life: 3 Years
|
- 10g*2 Powder
- 6ml*1 Liquid
|
